After the ambient light becomes bright
and lasts at least for 10 seconds, all
lights will turn on again.
If the ambient light becomes bright and
lasts for at least 10 seconds, all light will
be on.
Night sensing mode
You can activate the night sensing
mode in two ways.
Activating the night sensing
mode manually
• Before you go to sleep, touch
manually to activate the Night
sensing mode.
» If the air quality light is blue,
the air purifier directly goes to
the Night sensing mode. The
air purifier operates quietely
and the air quality light will be
dimmed.
» If the air quality light is not blue,
the air purifier operates under
turbo mode for a maximum of
10 minutes, the air quality light
blinks slow during this time, and
then goes to the Night sensing
mode.
Manual
• Touch the fan speed button
repeatedly to select the fan speed
you need.
Turbo (t)
In turbo mode, the air purifier operates
on the highest speed.
• Touch the fan speed button to
select the turbo mode (t).
Light sensor
With the light sensor, the air purifier can
work according to the ambient light.
When the ambient light dims for
10 seconds, all the lights on the control
panel will turn off slowly. During this
period, you can touch any of the
buttons, all lights will turn on again. If
you don't perform other operations
within 10 seconds, all lights will turn off.
30 EN
To Next Page
Loading...
