Philips AC2726 - Page 35

35EN
English
6 To reattach the back cover, mount
the panel onto the bottom of the
appliance first, and then push
the top of the panel against the
appliance.
Preparing for
humidification
1 Pull out the water tank.
2 Lift the water tray upwards and pull
it out horizontally.
2
1
3 Remove all packaging material
of the NanoCloud rotary
humidification wick.
Note
• The humidification wick has been
assembled on the wick wheel upon
purchase.
4 Place the wick wheel on the wick
support.
Note
• When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.