Why is my Philips Air Cleaner so loud?
If your Philips Air Cleaner is unusually loud, ensure all packaging material has been removed from the filters. You can also try changing the fan speed to a lower level.
How to fix Philips AC2729 Air Cleaner Wi-Fi setup?
If the Wi-Fi setup for your Philips Air Cleaner is not successful, and if the router your purifier is connected to is dual – band and currently it is not connecting to a 2.4GHz network, switch to another band of the same router (2.4GHz) and try to pair your purifier again. 5GHz networks are not supported. Check if the purifier is within range of the Wi-Fi router by locating the air purifier closer to the Wi-Fi router. Also, ensure the network name and Wi-Fi password are correct, noting that both are case-sensitive. Retry the setup using the instructions in the section ‘Set up the Wi-Fi connection when the network has changed’. Keep the appliance away from other electronic devices that may cause interferences. Deactivate airplane mode on your mobile device. Consult the help section in the A...
Why does Philips Air Cleaner take long time to humidify?
If it takes a long time to reach the target humidity level with the Philips Air Cleaner, close doors and windows during use to optimize humidification and purification performance. This is because in dry conditions, moisture from the humidifier will be absorbed by walls, furniture, and other items in your room.
Why Philips AC2729 Air Cleaner doesn't improve air quality?
If the air quality does not improve even after running the Philips Air Cleaner for a long time, first check if the packing material is removed from the filters. Ensure all filters are properly installed in the correct order: NanoProtect filter Series 3 (FY1410), NanoProtect filter Active Carbon (FY1413), and the pre-filter. Also, make sure the air quality sensor is clean and dry.
How to reduce noise of Philips AC2729?
If the Philips Air Cleaner is extra loud, make sure you have removed all packaging material from the filters. You can also try changing the fan speed to a lower level.
What to do if airflow is weak on Philips AC2729?
If your Philips Air Cleaner's airflow is significantly weaker than before, the pre-filter may be dirty. Clean the pre-filter. Also, ensure all packaging material has been removed from the NanoProtect filter.
Why does my Philips Air Cleaner produce a strange smell?
If the Philips Air Cleaner produces a strange smell, especially the first few times you use it, this is normal and likely a plastic smell. If the smell persists or smells burnt even after removing the filters, contact your Philips dealer or an authorized Philips service center. If the filter smells after use, remove it and place it in direct sunlight with ventilation for several hours, then reinstall. If the odor remains, replace the filter.
What are the white deposits on my Philips Air Cleaner's humidification wick?
The white deposits on the NanoCloud rotary humidification wick of your Philips Air Cleaner are scale, consisting of minerals from the water. Follow the cleaning instructions in the user manual to address this.
Why does it take so long to reach the target humidity level on my Philips AC2729?
To optimize the humidification and purification performance of your Philips Air Cleaner, close doors and windows during use.
How to fix Philips AC2729 Air Cleaner Wi-Fi setup issues?
If you're having trouble setting up Wi-Fi on your Philips Air Cleaner, ensure the purifier is connected to a 2.4GHz network (5GHz networks are not supported). Web authentication networks are also not supported. Check if the purifier is within range of the Wi-Fi router. Verify that the network name and Wi-Fi password are correct, noting that both are case-sensitive. Also, ensure your mobile device is not in airplane mode and retry the setup.
General safety instructions and warnings for using the appliance.
Lists and identifies all parts of the air purifier with corresponding labels.
Details the functions of control buttons and display panel indicators.
Step-by-step guide on how to install the NanoProtect filter correctly.
Instructions for setting up the humidification function, including water tank preparation.
Guide for connecting the air purifier to a Wi-Fi network via the "Air Matters" app.
Explains the meaning of different air quality light colors and their corresponding PM2.5 levels.
Instructions on how to power the appliance on and off.
How to adjust the desired humidity level for the room.
Explains how to switch between purification-only and 2-in-1 modes.
Details how to dim or turn off the appliance's lights and display.
How to cycle through different display modes like PM2.5, IAI, and humidity.
Guide to selecting between Auto, Allergen, and Sleep modes.
How to manually adjust the fan speed to different levels.
Instructions on setting the appliance to operate for a specific duration.
How to activate and deactivate the child lock feature.
Information about checking the water level and the water refill alert.
Recommended frequency and methods for cleaning different parts of the appliance.
How to clean the exterior surfaces and air outlet of the purifier.
Step-by-step guide to cleaning the air quality sensor for accurate readings.
Detailed instructions for cleaning these specific components regularly.
How to clean the pre-filter, including when the alert is shown.
Procedure for removing limescale buildup from the humidification wick using cleaning agents.
Explains the lock feature that ensures filters are replaced for optimal operation.
Step-by-step guide for replacing the NanoProtect filter, including filter alert indicators.
Instructions for replacing the NanoCloud humidification wick, guided by filter alerts.
Where to get information, order parts, or contact customer service.
Information regarding the appliance's compliance with electromagnetic field standards.
Guidelines for proper disposal and recycling of the product at its end of life.
Legal notices regarding app trademarks and open-source software used.
General| Control type | Touch |
|---|---|
| Product color | Black, White |
| Built-in display | Yes |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Efficiency | 99.97 % |
| Motor type | DC |
| Cord length | 1.8 m |
| Noise level | - dB |
| Air purify rate | 250 m³/h |
| Number of modes | 3 |
| Number of speeds | 4 |
| Country of origin | China |
| Timer duration (maximum) | 12 h |
| Timer duration (minimum) | 1 h |
| Suitable for room area up to | 65 m² |
| Filters out bacteria | 99.9 % |
| AC input voltage | 220 V |
| AC input frequency | 50 Hz |
| Package depth | 446 mm |
| Package width | 310 mm |
| Package height | 695 mm |
| Package weight | 9.9 g |
Weight and Dimensions| Depth | 396 mm |
|---|---|
| Width | 230 mm |
| Height | 580 mm |
To Next Page