Philips AC2729 - Replace the filter and wick; Understanding the healthy air protect lock; Replacing the NanoProtect filter

16 EN
Replacing the
NanoProtect lter (g. ‹)
Note
• The lter is not washable or
reusable.
• Always turn o the air purier and
unplug from the electrical outlet
before replacing the lters.
Filter alert light
status
Follow this
A3 is displayed and
the lter replacement
light ashes on
the screen.
Replace the
NanoProtect
lter Series 3
(FY1410)
C7 is displayed and
the lter replacement
light ashes on
the screen.
Replace the
NanoProtect
lter Active
Carbon (FY1413)
1 Remove the used lters from the
appliance (g. Œ).
Note
• Do not touch the pleated lter
surface, or smell the lters as they
have collected pollutants from the air.
• Wash your hands after disposing of
the used lters.
2 Remove all packaging material of
the new lters (g. f).
3 Place the new lters into the
appliance (g. g).
4 Touch and hold for 3 seconds to
reset the NanoProtect lter lifetime
counter.
6 Replace the
filter and wick
Understanding the
healthy air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the Nano protect lter and the
humidication wick are in optimal
condition when the appliance is operating.
When the Nano protect lter and the
humidication wick are almost expired,
the replacement light starts to ash to
indicate that they need to be replaced.
If you do not replace the lter and
wick in time, the appliance will stop
operating and get locked.