Philips AC2729 - Changing the fan speed; Setting the timer; Setting the child lock; Water level

12 EN
Setting the child lock
1 Touch and hold the child lock
button for 3 seconds to activate
child lock (g. ).
» displays on the screen for
3 seconds.
» When the child lock is on,
all the other buttons are not
responsive.
2 Touch and hold the child lock
button for 3 seconds again to
deactivate child lock (g. €).
» displays on the screen for
3 seconds.
Water level
The water level in the water tank is
visible through the water level window
on the water tank.
When there is not enough water in the
water tank, the water rell light goes
on to indicate that you have to rell the
water tank. (g. )
Note
• When there is no water in the
water tank, the wick wheel will stop
rotating. When the water tank is
relled with water, the wick wheel
will start rotating again.
Changing the fan speed
There are several fan speeds available.
Manual
• Touch the fan speed button
repeatedly to select the desired fan
speed (1, 2 or 3) (g. |).
Turbo (t)
In Turbo mode, the air purier operates
on the highest speed.
• Touch the fan speed button to
select the Turbo mode ( ) (g. }).
Setting the timer
With the timer, you can let the appliance
operate for a set number of hours. When
the set time has elapsed, the appliance
will automatically switch o.
• Touch the Timer/Reset button
repeatedly to choose the number
of hours you want the appliance to
operate (g. ~).
» The timer is available from 1 to
12 hours.
• To deactivate the timer function,
touch the Timer/Reset button
repeatedly until "---" displays on the
screen.