50 EN
4 Take the used NanoCloud rotary
humidification wick out.
5 Remove all packaging material
of the new NanoCloud rotary
humidification wick.
6 Place the new NanoCloud rotary
humidification wick in the wick
wheel, and then fasten the locks on
the wick wheel.
7 Place the wick wheel on the wick
support.
Note
• When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
8 Place the water tray and water tank
back into the appliance.
9 Touch and hold for 3 seconds
to reset the NanoCloud rotary
humidification wick lifetime counter.
To Next Page
Loading...
