Philips AC3033 - Replacing the filter

34 EN
Replacing the lter
Understanding the healthy protection lock
This air purier is equipped with a lter replacement indicator to make sure
that the air purication lter is in optimal condition when the air purier is
operating� When the lter need to be replaced, the lter replacement alert
lights up red�
If the lter is not replaced in time, the air purier will stop operating and
automatically lock to protect the air quality in the room� Replace the lter as
soon as possible�
Replacing the lter
Note:
• The lter is not washable or reusable�
• Always turn o the air purier and unplug from the electrical outlet before
replacing the lters�
Filter alert light status Action
The lter replacement
alert lights up
Replace the
NanoProtect lter Pro S3
(FY3140)
1 Switch o the air purier and unplug from the power socket�
2 3 4 5 6
2 Pull the back cover and remove it from the appliance�
3 Pull the lter from the appliance�
4 Remove all packaging materials of the air purication lter�
5 Put the lter back into the appliance�
6 Reattach the back cover�
过敏原 气态污染物