Philips AC3036/10 - Using the Air Purifier; Understanding the Air Quality Light

7EN
English
Reset the Wi-Fi connection
Note:
• Reset the Wi-Fi connection when your default network has changed�
1 Put the plug of the air purier in the power socket and touch to turn on
the air purier�
2 Touch and simultaneously for 3 seconds until you hear a beep�
» The air purier goes to pairing mode�
» The Wi-Fi indicator blinks orange�
3 Follow the steps 3-4 in “Setting up the Wi-Fi connection for the rst time”
section�
4 Using the air purifier
Understanding the air quality light
The air quality light automatically goes
on when the air purier is switched on,
and lights up all colors in sequence�
After approximately 30 seconds, the
particle sensor selects the color that
corresponds to the surrounding air
quality of airborne particles�
The color of the air quality light is
determined by the highest index among PM2�5, IAI and Gas readings�
IAI
The professional-grade AeraSense sensor
detects the level of indoor air allergen and
with numerical feedback from 1 to 12 the
potential risk level of indoor air allergens can
be displayed� 1 indicates best air quality�
Air quality light color Air quality level
Blue Good
Blue-purple Fair
Purple-red Poor
Red Very poor
IAI level Air quality light color
1-3 Blue
4-6 Blue-purple
7-9 Purple-red
10-12 Red