Philips AC3055/51 - Cleaning Schedule; Cleaning the Body of the Air Purifier; Checking the Filter Status; Cleaning and Maintenance

10 EN
Checking the lter status
• Touch the lter status check/reset button to check the lter service life status (g s).
» The percentage of remaining service life of the lter displays on the screen.
Icon color Filter life indication Display (%)
Blue Optimal service life 16-100
Blue-purple Good service life 9-15
Purple-red Service life almost reaches the end 4-8
Red Service life ends, replace the lter 0-3
Note: The appliance goes back to normal display if no operations after 3 seconds.
5 Cleaning and maintenance
Note:
• Always unplug the appliance before you clean it.
• Never immerse the appliance in water or any other liquid.
• Never use abrasive, aggressive, or ammable cleaning agents such as bleach or alcohol to
clean any part of the appliance.
• Never use any liquids (including water) to clean the lter.
• Do not attempt to clean the particle sensor and gas sensor with a vacuum cleaner.
Cleaning schedule
Frequency Cleaning method
When necessary
Wipe the surface of the appliance with a soft dry cloth
Clean the air outlet cover
Every two months Clean the particle sensor with a dry cotton swab
The displays on
the screen.
Clean the surface of the lter
Cleaning the body of the air purier
Regularly clean the inside and outside of the air purier to prevent dust from collecting.
1 Use a soft, dry cloth to clean both the interior and exterior of the air purier.
2 The air outlet can also be cleaned with a dry, soft cloth.