Philips AC3055/51 - Using the Air Purifier; Understanding the Air Quality Light

7EN
English
Reset the Wi-Fi connection
Note:
• Reset the Wi-Fi connection when your default network has changed.
1 Put the plug of the air purier in the power socket and touch to turn on the air purier.
2 Touch and simultaneously for 3 seconds until you hear a beep.
» The air purier goes to pairing mode.
» The Wi-Fi indicator blinks orange.
3 Follow the steps 3-4 in “Setting up the Wi-Fi connection for the rst time” section.
4 Using the air purifier
Understanding the air quality light
The air quality light automatically goes
on when the air purier is switched on,
and lights up all colors in sequence. After
approximately 30 seconds, the particle
sensor selects the color that corresponds
to the surrounding air quality of airborne
particles.
The color of the air quality light is
determined by the highest risk index among PM2.5, IAI and Gas readings.
IAI
The professional-grade AeraSense sensor detects
the level of indoor air allergen and with numerical
feedback from 1 to 12 the potential risk level of
indoor air allergens can be displayed. 1 indicates
best air quality.
Air quality light color Air quality level
Blue Good
Blue-purple Fair
Purple-red Poor
Red Very poor
IAI level Air quality light color
1-3 Blue
4-6 Blue-purple
7-9 Purple-red
10-12 Red