9EN
Changing the day mode setting
You can choose Auto mode, speed 1, speed 2 or Turbo mode by touching the button.
Auto mode ( ): In Auto mode, the dual-sensor senses the air quality in real-time and the
appliance automatically adjusts the fan speed in accordance with the ambient air quality.
The control panel can automatically adjust display screen brightness according to the
ambient light (g i).
Manual speed ( & ): In manual mode, the air purier operates on speed 1 or speed 2
(g j).
Turbo mode ( ): In Turbo mode, the air purier operates on the highest speed (g k).
Changing the night mode setting
You can choose normal Sleep mode or Allergy Sleep mode by touching the button.
Normal Sleep mode: In normal Sleep mode, the air purier operates quietly at a low speed.
After 3 seconds, the button dims, all lights and buttons are o (g l).
Allergy Sleep mode ( ): In Allergy Sleep mode, the air puriers responds to night-time
dust events and switches the device to a more powerful mode– while keeping the sound
level suitable for sleep. The indicator displays on the screen. The and dims, other
buttons are o (g m).
Touch any button to wake up from the sleep mode. Then, if no further operation within
3 seconds, all lights will be dim again.
Switching the display indicator
Note: The appliance displays PM2.5 level by default.
» Touch the button to switch display indicator among Gas/PM2.5/IAI (g n &
g o & g p).
Using the light on/o function
With the light sensor, the control panel can automatically turn on, turn o or dim according to
the ambient light. The control panel will be o or dim when the ambient light is dark. You can
touch any button to wake up all lights. Then, if no further operation, all lights will be o or
dim again to match with the ambient light (g q).
You can touch and hold the button for 3 seconds manually to turn o all lights and the
control panel. Touch any button to wake up all lights (g r).
To Next Page
Loading...
