Philips AC4012 - Setting the Timer Function

11
English
3 Press the

button repeatedly to choose
the number of hours you want the
purier to operate. The corresponding

light ( , , or ) goes on.
To deactivate the timer function, press the

button repeatedly until the

light ( , , or )
is out.
Set the timer
With the timer function, you can let the purier
operate for a set number of hours. When the
set time has elapsed, the purier automatically
switches off.
You can use the timer function in the following
situations:
Situations You will see
Choose a fan
speed (see
‘Change the fan
speed’).
One of the lights
(AC4012 - , , or ;
AC4014 - , , or )
and one of the

lights ( ,
, or ) are on.
The purier is in
sleep mode (see
‘Sleep mode’).
The light and one of
the

lights ( , , or )
are on but dimmed.
1 Press the

button to switch on the
purier.
2 Press the

button to activate the timer.
» The

light ( , , or ) goes on.
EN
English