Philips AC4012 - 6 Clean the pre-filter; Cleaning the Pre-Filter

13
English
3 To remove the pre-lter, grab the two
projections and pull the lter towards
you.
4 Wash the pre-lter under a running tap. If
the pre-lter is very dirty, use a soft brush
to brush away the dust.
5 Air dry the pre-lter.
6 Put the pre-lter back into the purier.
Attach all hooks properly to the purier.
6 Clean the pre-
filter
Note
• The pre-lter is washable.
• Clean the pre-lter for every two weeks to
ensure optimal functioning of the purier.
1 Switch off the purier and unplug it.
2 Place your ngers in the recess of the side
panels and gently pull the bottom part of
the front panel towards you (1). Then lift
the hooks at the top of the panel out of
the top of the purier (2).
1
2
EN
English