Philips AC4012 - Page 14

14
7 To reattach the front panel, insert the top
hooks into the top of the purier rst (1).
Then, push the panel against the body of
the purier (2).
1
2
Note
• Alternatively, you can clean the pre-lter by
removing the dust with a vacuum cleaner.
• Make sure that the pre-lter is completely dry.
If it is still wet, bacteria may multiply in it and
shorten the lifetime of the pre-lter.
• Make sure that the side with the two
projections is pointing towards you, and that all
hooks of the pre-lter are properly attached
to the purier.
EN