Philips AC4025/10 - Get Started; Install Filters

6
EN
3 Remove all the lters from the purier.
4
4 Remove all packaging material from the
lters.
5 Put the lters back into the purier.
Note
•
Make sure that the side with the tag is pointing
towards you, and the tag is at the bottom end of
the lter.
3 Get started
Installlters
The air purier comes with all lters tted
inside, but you have to remove the packaging
of the lters before you can use the appliance.
Remove all lters, unpack them, and place
them back into the air purier as described
below.
Tip
•
When you remove or insert lters, place the air
purier against a wall for more stability.
Note
•
Insert the lters in the correct position.
1 Place your ngers at the top panel and
gently pull the top part of the front panel
towards you. (1)
2 Lift the panel out of the hooks at the
bottom of the purier. (2)
1
2
EN