18 EN
Problem Possible solution
The color
of the air
quality light
always stays
the same.
There is not enough ventilation
in the room. Open a window,
to improve the air circulation.
is extra loud.
You have not removed all
packaging material from the
removed all packaging material.
You can change the fan speed
to lower fan speed level.
still indicates
that I need
to replace a
already did.
Perhaps you did not press the
button properly. Plug in
button and press the
button for 2 seconds.
9 Troubleshooting
This chapter summarizes the most common
problems you could encounter with the
with the information below, contact the
Consumer Care Center in your country.
Problem Possible solution
light has
been on
continuously.
No air
comes out
of the air
outlet.
to the power supply. Plug the
and switch on.
The fan
speed does
not change
when the
silent mode
is activated.
In silent mode, the fan speed
is set to a very low level. If
you want to change the fan
speed and leave the silent
mode, press the
button
one or more times to set the
desired fan speed.
that comes
out of the
air outlet is
weaker than
before.
You haven’t removed all
packaging material from the
removed all packaging material.
The air
quality does
not improve,
even though
has been
operating
for a long
time.
installed in the following order,
starting with the innermost
To Next Page
Loading...
