9EN
PM2.5
AeraSense sensing technology
accurately detects and quickly
responds to even the slightest
particle change in the air. It provides
you with reassurance with real-time
PM2.5 feedback.
Most of the indoor air pollutants
fall under PM2.5 – which refers to
airborne particle pollutants smaller
than 2.5 micrometers. Common
indoor sources of ne particles are
tobacco smoke, cooking, burning
candles. Some airborne bacteria
and the smallest mold spores, pet
allergen and dust mite allergen
particles also fall under PM2.5.
PM2.5 level Air quality light
color
≤12 Blue
13-35 Blue-purple
36-55 Purple-red
>55 Red
Turning on and o
Note
• Always place the air purier on
a stable, horizontal, and level
surface with the front of the
unit facing away from walls or
furniture.
• For optimum purication
performance, close doors and
windows.
• Keep curtains away from the air
inlet or air outlet.
• Do not block the inlet or air
outlet with clothing.
1 Put the plug of the air purier in
the wall outlet.
» The air purier beeps.
» All lights go on once and
then go out again.
2 Touch the button to switch on
the appliance (g. j).
» The air purier operates
under the general mode by
default.
» When the air purier is
warming up, " " displays
on the screen.
» After 30 seconds, the air
purier shows the highest
level among IAI/Gas/PM2.5
on the screen. The air
quality sensor automatically
selects the appropriate air
quality light color (g. k).
3 Touch and hold the button for
3 seconds to switch o the air
purier.
To Next Page
Loading...
