Philips AC4558/80 - Storage

English
15EN
1 Turn o the air purier and
unplug from the power socket.
2 Take out the used air lter
according to the lter alert light
status displayed on the screen.
Discard used lters (g. }).
Note
• Do not touch the pleated lter
surface, or smell the lter as it
has collected pollutants from
the air.
3 Remove all packaging material of
the new lters (g. f).
4 Put the unpacked air
purication lters back into the
appliance (g. g).
5 Put the plug of the air purier in
the power socket.
6 Touch the button to switch on
the appliance.
7 Touch and hold the reset button
for 3 seconds to reset the
lter lifetime counter.
Note
• Wash your hands after changing
lters.
7 Storage
1 Turn o the air purier and
unplug from the wall outlet.
2 Clean the air purier, air quality
sensor and pre-lter (see
chapter ‘Cleaning’).
3 Let all parts air dry thoroughly
before storing.
4 Wrap the lters and pre-lter
separately in air tight plastic
bags.
5 Store the air purier, lters and
pre-lters in a cool, dry location.
6 Always thoroughly wash hands
after handling lters.