Philips AC4558/80 - Page 9

English
7EN
Note
• This instruction is only valid
when the air purier is being
set up for the rst time. If the
network has changed or the
setup needs to be performed
again, consult section "Reset
the Wi-Fi connection" on
page 7.
• If you want to connect more
than one air purier to your
smartphone or tablet, you have
to do this one by one. Complete
the set up of one air purier
before you turn on the other air
purier.
• Make sure that the distance
between your smartphone
or tablet and the air purier
is less than 10 m without any
obstructions.
• This App supports the latest
versions of Android and iOS.
Please check www.philips.com/
purier-compatibility for the
latest update of supported
operating systems and devices.
Reset the Wi-Fi connection
Note
• This applies when the default
network to which your purier is
connected has changed.
• Reset the Wi-Fi connection
when your default network has
changed.
1 Put the plug of the air purier in
the power socket and touch
to turn on the air purier.
2 Touch and simultaneously
for 3 seconds until you hear a
beep.
» The air purier goes to
pairing mode.
» The Wi-Fi indicator blinks
orange.
3 Follow the steps 4-5 in "Setting
up the Wi-Fi connection for the
rst time" section.