Philips AC4558 - Replacing Air Purification Filter; Understanding Healthy Air Protect Lock; Replacing the Filter

14
EN
6 Replacing the
air purification
filter
Understanding the
healthy air protect lock
This air purier is equipped with a
lter replacement indicator to make
sure that the air purication lter is
in optimal condition when the air
purier is operating. When the lters
need to be replaced, the lter code
displays on the screen and the lter
replacement alert ( ) lights up red.
If the lters are not replaced in time,
the air purier will stop operating
and automatically lock to protect
the air quality in the room. Replace
the lters as soon as possible
according to the lter code.
Replacing the lter
Note
• The air purication lter is not
washable or reusable.
• Always turn o the air purier
and unplug from the electrical
outlet before replacing the
lters.
• Do not clean the lter with a
vacuum.
• If the pre-lter is damaged,
worn or broken, do not use.
Visit www.philips.com/support
or contact the Consumer Care
Center in your country.
Filter alert chart ( g. |)
Filter alert light
status
Action
A3 displays
on the screen
and the lter
replacement
alert goes on.
Replace the
NanoProtect
lter Pro S3
(FY4152)
1 Turn o the air purier and
unplug from the power socket.
2 Take out the used air lter
according to the lter alert light
status displayed on the screen.
Discard used lter (g. }).
Note
• Do not touch the pleated lter
surface, or smell the lter as it
has collected pollutants from
the air.