Philips AC4558 - Getting Started; Installing the Filter; Wi-Fi Connection

6
EN
7 To reattach the front cover,
mount the cover onto the
bottom of the appliance rst (1).
Then, gently push the top of the
cover against the body of the
appliance (2) (g. i).
Wi-Fi connection
Setting up the Wi-Fi connection
for the rst time
1 Download and install the
"Air Matters" app from the
App Store or Google play.
2 Put the plug of the air purier in
the power socket and touch
to turn on the air purier.
» The Wi-Fi indicator blinks
orange for the rst time.
3 Make sure that your smartphone
or tablet is successfully
connected to your Wi-Fi
network.
4 Launch the "Air Matters" app
and click on "Connect an Air
Purier or Monitor" on the top of
the screen. Follow the onscreen
instructions to connect the air
purier to your network.
3 Getting started
Installing the lter
Remove all packaging of the lter
before using the appliance. Unpack
them and place them into the
appliance described as follows:
Note
• Make sure that you place the
air purication lter in the
appliance rst and then the pre-
lter.
• Make sure that the side with
the tag is pointing towards you
when installing the lter.
1 Pull the top part of the front
cover to remove it from the
appliance (g. c).
2 Press the two clips down and
pull the pre-lter towards you
(g. d).
3 Remove the lter (g. e).
4 Remove all packaging materials
of the air purication lter
(g. f).
5 Put the unpacked air
purication lter into the
appliance (g. g).
6 Put the pre-lter back into the
appliance (g. h).
Note
• Make sure that all hooks of the
pre-lte is properly attached to
the purier.