Philips AC4558 - Page 19

17
EN
English
Problem Possible solution
The appliance
produces a
strange smell.
• The rst few times you use the appliance, it may
produce a plastic smell. This is normal. However, if the
appliance produces a burnt smell even if removing
lters, contact your Philips dealer or an authorized
Philips service center. The lter may produce smell
after being used for a while because of the absorption
of indoor gases. It’s recommended that you reactivate
the lter by putting it in direct sunlight for repeated
use. If odor still exists, replace the lter.
The appliance is
extra loud.
• If the appliance is too loud, you can change the fan
speed to a lower fan speed level. When using the
appliance in a bedroom at night, choose the silent
speed.
The appliance
still indicates that
I need to replace
a lter, but I
already did.
• Perhaps you did not reset the lter lifetime counter.
Switch on the appliance. Then touch and hold the
reset button ( ) for 3 seconds.
Error code "E1"
displays on the
screeen.
• The motor has malfunctions. Contact the Consumer
Care Center in your country.
Error codes "E2",
"E3", "E4" or "E5"
displays on the
screen.
• The sensor has malfunctions. Contact the Consumer
Care Center in your country.