26 EN
5 Put the pre-filter back into the
appliance.
Note
• Make sure that the side with the
two clips is pointing towards you,
and that all hooks of the pre-
filter are properly attached to the
purifier.
6 To reattach the side panel,
mount the panel onto the
bottom of the appliance first
(1). Then, gently push the
panel against the body of the
appliance (2).
7 Repeat the above steps and
assemble the air purification
filter for the other side of the
appliance.
4 Using the
appliance
Understand the air
quality light
Color of the air
quality light
Air quality
level
Blue Good
Blue-violet Fair
Red-purple Unhealthy
Red Very
unhealthy
The air quality light automatically
goes on when the appliance is
switched on, and lights up all colors
in sequence.
In a short time the air quality
sensors select the color that
corresponds to the ambient air
quality.
Switch on
1
Put the plug of the appliance
into the wall socket.
» The appliance beeps.
» All lights go on once and
then go out again.
To Next Page
Loading...
