Philips ACT 7583 - Playback State Management

FEATURES
16
English
You can store the last position played. When restarting,
playback continues from where you have stopped.
1 Switch the slider to RESUME during playback to
activate RESUME.
y RESUME is shown.
2 Press 9 whenever you want to stop playback.
3 Press 2; whenever you want to resume playback.
y RESUME is shown and playback continues from
where you have stopped.
• To deactivate RESUME, switch the slider to OFF.
y RESUME goes off.
Note: If you open the CD lid, the last position played will not be stored any longer.
You can lock the buttons of the set. When a key is
pressed, no action will be executed then.
1 Switch the slider to HOLD to activate HOLD.
y All buttons are locked. HoLd is displayed by
pressing any key. If the set is switched off,
HoLd is displayed only
by pressing 2;.
2 To deactivate HOLD, switch the slider to OFF.
Note: When you deactivate HOLD by switching the
slider to RESUME and restart, playback continues
from where you have stopped.
V
O
L
O
F
F
RESUME
H
O
LD
Locking all buttons – HOLD
RESUME
V
O
L
OFF
R
E
S
U
M
E
H
O
L
D
Storing the last position played – RESUME