Philips ACT 7583 - POWER SUPPLY; Battery Usage and Indicators

POWER SUPPLY
8
English
With this set you can use either:
• alkaline batteries (type LR6, UM3 or AA), or
• the rechargeable ECO-PLUS NiMH batteries AY 3362. Make sure you purchase
these special batteries, as any other batteries cannot be recharged on this set.
Inserting batteries
1 Unfasten the buckle.
2 Open the CD lid.
3 Open the battery compartment and insert either
2 alkaline batteries or the AY 3362 batteries.
Notes: – Old and new or different types of batteries
should not be used in combination.
– Remove batteries if they are empty or if the
set will not be used for a long time.
Batteries contain chemical substances, so they
should be disposed of properly.
Indication of battery condition
• Full batteries: no indication.
• Weak batteries: a flashes. This symbol is not
shown when the rechargeable batteries are used.
• Empty batteries: A flashes and bAtt is
displayed. Replace the batteries or connect the
mains adapter.
Average playing time of batteries under normal conditions
Battery type ESP off ESP on PSM
Normal 5 hours 4 hours 6 hours
Alkaline 14 hours 12 hours 18 hours
NiMH 10 hours 8 hours 12 hours
P
R
O
G
M
O
D
E
DBB
ES
P
P
/ LINE OUT
V
O
L
O
F
F
R
E
S
U
M
E
H
O
L
D
Batteries (supplied or optionally available)