EasyManua.ls Logo

Philips ACT 7583 - Mains Adapter and Recharging

Philips ACT 7583
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER SUPPLY
9
Only use the AY 3170 mains adapter
(4.5V/300mA direct current, positive pole to the
centre pin). Any other product may damage the set.
1 Make sure the local voltage corresponds to the
adapter’s voltage.
2 Connect the mains adapter to the 4.5V DC
socket of the player and to the wall socket.
Notes: – Always disconnect the adapter when you are not using it.
– No acoustic feedback is available when using the adapter.
1 Make sure you insert the rechargeable ECO-PLUS NiMH batteries AY 3362.
2 Connect the mains adapter to the 4.5V DC socket of the player and to
the wall socket.
3 If necessary press 9 once or twice until the set is
switched off.
y a is shown and CHArGE is displayed.
The approximate charging time is 5 hours.
4 When the batteries are fully recharged, a is
shown and FULL is displayed.
Note: It is normal for the batteries to become warm
during recharging.
Recharging the AY 3362 ECO-PLUS NiMH batteries on board
Mains adapter (supplied or optionally available)
English

Related product manuals