Philips AE1850 - Install batteries; Power on; Set the clock

5
EN
Install batteries
Caution
• Risk of explosion! Keep batteries away from heat, sunshine or re.
Never discard batteries in re.
• Risk of product damage! When the product is not used for a long
period, remove the batteries.
• Batteries contain chemical substances, so they should be disposed
of properly.
1 Open the battery compartment.
2 Insert 2 alkaline batteries (not supplied), type AA, R06, or UM3,
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Power on
Press .
• To switch the product to standby mode, press again.
Set the clock
1 In standby mode, press and hold SET TIME.
• Do not release the button until the clock setting is
complete.
2 Press HOUR repeatedly or press and hold it to set the hour.
3 Press MIN repeatedly or press and hold it to set the minute.
4 Release SET TIME.
» The set clock is displayed.