Philips AE2430/12 - Program Radio Stations Manually

2 Press and hold PROG/AUTO SCAN for 2 seconds.
All available stations are programmed in the order of »
waveband reception strength.
Therstprogramedradiostationbroadcastsautomatically. »
Program radio stations manually
Note
You can program a maximum of 10 preset FM radio stations and 10 •
MW radio stations.
1 Press to turn on the radio.
2 Tune to a radio station.
3 Press PROG/AUTO SCAN.
The radio frequency begins to blink. »
4 Press 1 - 10 to select a number.
The selected number begins to blink. »
5 Press PROG/AUTO SCANtoconrm.
6 Repeat steps 2 - 5 to program more stations.
To store the previous/next radio station with strongest signal
1 Press to turn on the radio.
2 Press PROG/AUTO SCAN.
The radio frequency begins to blink. »
3 Rotate TUNING clockwise/counterclockwise to skip to the
next/previous radio station with strongest signal.
4 Press 1 - 10 to select a number.
The selected number begins to blink. »