EasyManua.ls Logo

Philips AJ 3010 - Sleep Timer and Maintenance; Sleep Timer Operation; Maintenance Recommendations

Philips AJ 3010
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. During the alarm call,
press REPEAT ALARM / BRIGHTNESS CONTROL.
The selected alarm indicator flashing during a repeat
alarm.
2. Repeat if desired.
SLEEP
About SLEEP
This set has a built-in sleep timer which enables the set to be
automatically switched off during radio playback after a set
period of time. There are four sleep times before the set turns
itself off: 60, 30, 15 minutes and off.
Setting SLEEP
1. Press SLEEP / RADIO ON to switch on the radio.
2. Within 1 second, press SLEEP / RADIO ON again once or
more to select your sleep time.
Display shows in sequence:
SLEEP and the sleep period
time options: SL : 60, SL : 30, SL : 15 and OFF.
3. To cancel sleep, press either:
ALARM RESET / RADIO OFF
REPEAT ALARM /
BRIGHTNESS CONTROL
SLEEP / RADIO ON once or more until SLEEP disappears
from the display.
MAINTENANCE
If you do not intend to use the set for a long time,
withdraw the mains plug from the wall outlet and remove
the backup batteries.
Do not expose the set to humidity, rain, sand or excessive
heat caused by heating equipment or direct sunlight.
To clean the set, use a soft, slightly dampened chamois
leather. Do not use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may harm the
housing.
8
English
XP AJ3010/00 20-06-2000 16:33 Pagina 8

Other manuals for Philips AJ 3010

Related product manuals