Philips AJ3138 - Setting and Managing Alarms; Configuring the Alarm Timer

Tip
To overwrite a programmed station, program another station in its •
place.
Select a preset radio station
1 Press radio to turn on radio.
2 Press +/- to select a radio station.
5 Set the alarm timer
You can set two separate alarms. For the alarm tone, you can select the
buzz, the FM radio, or a piece of recorded sound.
1 Before you start, ensure that the time is set correctly.
2 Press / .
»
or is displayed.
3 Press set/scan.
The hour digits begin to blink. »
4 Press +/- to set the hour.
5 Press set/scantoconrm.
The minute digits begin to blink. »
6 Repeat steps 3-5 to set the minute.
7 Repeat steps 3-5 to select days for the alarm.
8 Repeat steps 3-5 to select buzz or radio or recorded sound for
the alarm.
The apparatus turns on automatically at the set time and rings with »
buzz or radio or recorded sound.