Record a piece of sound
Note
You can record for a maximum of 8 seconds. •
1 Press and hold rec/play during the whole process of recording.
[ »
REC] is displayed.
When the sound is recorded, »
is displayed.
Tip
Keep the sound source close to • mic on the top of the unit.
To play the recorded sound, press • rec/play.
»
is displayed.
Adjust the volume level
1 Rotate volume to increase/decrease the volume level.
Adjust display brightness
1 Press repeat alarm/brightness control repeatedly to turn on/
off the backlight of the display.
Activate the backlight blinking function
1 Press and hold repeat alarm/brightness control for 5 seconds.
The backlight blinks. »
When the alarm rings next time, the backlight blinks for 3 minutes. »
To Next Page
Loading...
