Blurry projection
– Angle between the projection surface too large
• Adjust the angle.
– Focus is not proper
•Turn
FOCUS
wheel.
The main unit cannot read or update outdoor temperature from
the sensor
– No signal or weak signal.
• Reset both the main unit and the sensor. Or improve the sensor reception. See
“ Using the sensor to detect outdoor temperature”.
This product complies with the radio interference requirements of the
European Union.
The typeplate and production number are located inside the battery
compartment.
AJ3650_12_EN 1/25/08 14:49 Page 15
To Next Page
Loading...
