–
When clock time is displayed, to view the current radio frequency,
• Press RADIO
twice.
• For preset stations, press the respective PRESET button once or repeatedly.
USING THE ALARM
Two different alarm times can be set. This can be useful when you and your part-
ner need to be woken up at different time. Besides, you can set different alarm
sounds respectively among tuner or sounds of nature.
SETTING THE ALARM
1. Press and hold ALARM 1 until hour digits start flashing.
2.
Hold down or press TUNING +/- repeatedly to set the desired hour.
3. Press ALARM 1
to confirm.
™
Minute digits start flashing.
4.
Hold down or press TUNING +/- repeatedly to set the desired minute.
5. Press ALARM 1
to confirm.
™
starts flashing.
6. Press
TUNING +/- repeatedly to select the desired alarm sound.
7. Press ALARM 1
to confirm.
8.
Repeat the steps above but press
ALARM 2
instead of
ALARM 1
to set the
other alarm.
Helpful hints:
–
If you have selected radio as the alarm sound, make sure you have properly tuned
to a station and set the volume before turning off the radio.
–
To check the alarm time setting for ALARM 1 or ALARM 2, press ALARM 1 or
ALARM 2.
–
It is not possible to adjust the alarm time during an alarm call or alarm repeating mode.
SWITCHING OFF THE ALARM
REPEAT ALARM
This repeats your alarm call at 9 minute intervals.
•
During the alarm call, press REPEAT
ALARM /BRIGHTNESS CONTROL
.
™
A
larm sound indicator
flashes during a repeat alarm.
•
Repeat if desired.
AJ3650_12_EN 1/25/08 14:49 Page 10
To Next Page
Loading...
