Philips AJ3650 - Page 11

DEACTIVATING THE ALARM COMPLETELY
• Press ALARM 1 or ALARM 2 button once or more until the disappears.
SLEEP
About Sleep
This set has a built-in sleep timer, which enables the radio to be automatically
switched off or relaxation music volume to be turned down gradually after a set
period of time.
Setting and switching off SLEEP
1. Press SLEEP .
™ Time to sleep flashes.
2. Press SLEEP repeatedly to switch between:15->30->60->90->120->OFF.
3. Press PRESET +/- repeatedly to select next or previous in-built relaxation
music.
4. To cancel sleep, switches the timer to OFF.
USING THE PROJECTION
With this projection feature, you can conveniently project the clock time onto a
surface e.g. walls ceiling (furniture and glass are not recommended).
1. Press PROJECTION/IMAGE FLIP to switch on projection.
™ The Projection lens and LED indicator light up.
2. Turn the FOCUS wheel to make the projection image clearest.
3. Press and hold PROJECTION/IMAGE FLIP to flip the projected image vertically,
along the horizontal axis.
4. Push the projection cone to pop it out (See
4 ).
5. To change the projection slightly to a different angle, turn the IMAGE ROTATE
wheel (maximum 90 degree left or right).
6. Press PROJECTION/IMAGE FLIP to switch between: bright, dim, very dim and off.
Helpful hints:
– Turn the projection lens right upside before trying to push it back into the set.
Warning:
– The projection light might harm your eye. Please do not look at the projection lens
directly.
AJ3650_12_EN 1/25/08 14:49 Page 11