Philips AJ5000 - Set Alarm Timer

Adjust volume G
5 Set alarm timer
Set alarm time H
In standby mode, you can set two alarms to ring at different time.
Select alarm sound
For the alarm sound, you can select buzzer, your last heard radio, or the
melody stored in the clock radio.
Adjust AL1/RADIO·BUZZ·
1 or AL2/RADIO·BUZZ· 2 to select
alarmsoundforAlarm1/Alarm2.
Activate/deactivate alarm timer
1 Press AL1/AL2 to view alarm settings.
2 Press AL1/AL2 again to activate or deactivate the alarm timer.
»
or appears if alarm timer is on and disappears if it is
off.
To stop alarm, press the corresponding • AL1/AL2 (or
RADIO).
The alarm repeats ringing for the next day.•
Note
When alarm sounds, you cannot adjust volume by rotating • VOL.