Philips AMF765/10 - Turning on and off; Oscillation; Function Switch

10 EN
Turningonando
Note:
•
Foroptimumpuricationperformance,closedoorsandwindows.
•
Keep curtains away from the air inlet or air outlet�
•
Plug the appliance into the power outlet; do not use a power strip�
1 Plug the Air Performer into the power socket.
2 Touch to switch on the Air Performer.
» The Air Performer beeps.
» The “ ” displays on the screen during warming
up. Then the Air Performer shows the PM2.5 level
after measuring the air quality.
3 Touch and hold the button for 3 seconds to switch o
the Air Performer.
Note:IftheAirPerformerstaysconnectedtotheelectricaloutletafterturningitOFF,theAir
Performer will operate under the previous settings when turned ON again�
Oscillation
Press the button to activate the oscillation feature in your
Air Performer, the appliance can oscillate at these angles:
45°, 90°,180°, 270°, 350° and OFF.
» The oscillation angle displays on the screen.
» If no operation is performed within 3 seconds, the
appliance goes back to normal display.
Functionswitch
You can choose the Circulation ( ) function, or Fan function ( ) by pressing
the button. You can adjust the fan speed manually; see section "Setting fan
speed�"
Circulation function ( ):
It distributes diused airow for optimal
air circulation by opening the back outlet,
maximizing purication performance and
reducing cooling sensation. At higher speeds, a
soft current of airow will blow harder through
the front outlet to increase cleaning power.