Philips AMF765/10 - Setting the Timer; Light Sensor; 5 Cleaning and Maintenance; Cleaning Schedule

13EN
Setting the timer
With the timer, you can let the appliance operate for a
set number of hours. When the set time has elapsed, the
appliance will automatically switch o.
1 Press the button repeatedly to choose the number of
hours you want the appliance to operate �
» 0�5h, 1h, 4h, or 8h is available.
2 To deactivate the timer, press the button repeatedly
until OFF displays on the screen.
Light sensor
With the light sensor:
•
The control panel can automatically turn on, turn o or dim according to the
ambient light.
•
The control panel will be o or dim when the ambient light is dark.
You can touch any button to turn on all lights. If no further operation, all lights will
be o or dim again to match with the ambient light.
5 Cleaning and maintenance
Note:
•
Always unplug the appliance before you clean it�
•
Never immerse the appliance in water or any other liquid�
•
Neveruseabrasive,aggressive,orammablecleaningagentssuchasbleachoralcoholtoclean
any part of the appliance�
•
Neveruseanyliquids(includingwater)tocleanthelter.
Cleaning schedule
Frequency Cleaning method
When necessary
Wipe the plastic part of the appliance with a
soft, dry cloth
Clean the air outlet cover
Every two months
Clean the particle sensor with a vacuum cleaner
or a dry cotton swab.
The displays on the screen.
Clean the surface of the lter