Daylight sensor
With the daylight sensor, the air purifier
can work according to the ambient light
10 seconds later after the ambient light
dimmed, all the lights on the control
panel will be go off slowly. During
this period, you can touch any of the
buttons, all lights will be on again. If you
don't perform other operations within 10
seconds, all lights will go off again.
If the ambient light becomes bright and
lasts for at least 10 seconds, all light will
be on.
Night sensing mode
You can activate the night sensing
mode in two ways.
Activating the night sensing
mode manually
• Before you go to sleep, touch
manually to activate the night
sensing mode.
» If the air quality light is blue,
the air purifier directly goes to
the night sensing mode. The
air purifier operates quietely
and the air quality light will be
dimmed.
Manual
• Touch the fan speed button
repeatedly to select the fan speed
you need.
Turbo (t)
In turbo mode, the air purifier operates
on the highest speed.
• Touch the fan speed button to
select the turbo mode (t).
12 EN
To Next Page
Loading...
