Philips AquaTouch 5000 Series - Cleaning Under the Tap

1
2
1 While holding the SmartClean system with one
hand, press the button on the side and lift the
top part of the SmartClean system.
2 Remove the cleaning cartridge from the
SmartClean system and pour out any remaining
cleaning fluid. You can safely pour the cleaning
fluid down the sink.
3 Discard the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull off
the seal.
5 Place the cleaning cartridge in the SmartClean
system.
6 While holding the SmartClean system with one
hand, gently push the top part back down
(‘click’).
Cleaning the shaver under the tap
Clean the shaver after every use for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
29
English