- Turn the ring clockwise until your hear a click to
indicate that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
8 Reinsert the hinge of the shaving head holder
into the slot of the shaving unit. Close the
shaving head holder (‘click’).
9 To reset the replacement reminder, press and
hold the on/off button for approx. 7 seconds.
Replacing the cleansing brush attachment
The cleansing brush attachment should be
replaced every 3 months or earlier if the brush
hairs are bent or damaged (see 'Ordering
accessories').
Ordering accessories
To buy accessories or spare parts, visit
www.philips.com/parts-and-accessories or go to
36
English
To Next Page
Loading...
