ENGLISH
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn shaver OFF.
Cleaning
◗ Always clean your shaver after each use.
◗ Always switch shaver OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch shaving heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use shaver if combs are damaged or
broken. Facial injury may occur.
◗ Do not use compressed air, abrasives,
scourers or aggressive liquids such as gasoline
or acetone to clean the shaver.
18
ENGLISH
Cleaning the Shaving Unit
The shaving heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse shaver in water.
◗ While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence.
1 Always turn shaver OFF, unplug from
outlet and remove power cord from
shaver.
C
2 Press the Shaver Head Release Button to
open the Shaver Head Assembly.
C
3 Clean inside shaving heads and hair
chamber by running under hot water.
19
To Next Page
Loading...
