VIII. Troubleshooting
Problem
No water comes
out from the
Cold water valve or the three-way
The system is not connected
Check if the power adapter is
connected to the system and
gets stable, or install a pressure
boost before the system if the
inlet water pressure is constantly
Possible cause Solution
Unplug the system, wait for
The electronic module is
Filter lifetime
indicators don't light
up when the faucet
Long press the reset button for
The reset button
up in red, and there
Turn on the faucet and allow
The system hasn't been used
Always use municipal tap water
water that is microbiologically
unsafe or of unknown quality
without adequate disinfection
Poor outlet water
To Next Page
Loading...
