Philips AVENT SCD603 - Baby Unit; Parent Unit; 3 Preparing for Use

5
1 Slide down the battery compartment lid to
remove it.
2 Insert the rechargeable battery.
D
Note:
Make sure the + and - poles point in the
right direction.
3 Reattach the lid.
3 Reattach the lid.
3.2 Parent unit
3.2.1 Operation on rechargeable battery
B Warning:
Unplug the parent unit and make sure your
hands and the unit are dry when you insert the
rechargeable battery.
• The parent unit comes with a rechargeable
Li-ion polymer 1100mAh battery.
• Charge the parent unit before you use it
for the rst time or when the parent unit
indicates that the battery is low.
• The battery is low when the empty battery
symbol ashes on the video display and the
battery/power-on light on the parent unit
ashes red.
D
Note:
If the battery is completely empty, the parent unit
automatically turns off and loses contact with the
baby unit.
ENGLISH