EasyManua.ls Logo

Philips Avent SCF293 - Page 11

Philips Avent SCF293
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Place the lid on top of the small basket�
6 Put the plug in the wall socket�
7 Turn the on/o button to “Sterilise” mode. Then press it
to switch on the appliance�
Caution: The base, the baskets and the lid become hot during
or shortly after operation.
The entire progress indicator lights ash to show the
appliance is sterilising�
When the sterilisation process is nished, the lights go o
and the appliance switches o automatically.
You can turn the on/o button to “Dry” mode to dry the
appliance. It takes approximately 30minutes to complete
the drying cycle�
2
1
8 After the appliance has cooled down completely, remove the lid, the small basket,
the bottom plate, the large basket and wipe them dry
Note: When you remove the large basket from the base, be aware of the remaining
water on the base drip tray.
9 Let the appliance cool down completely for approximately 10 minutes before you
use it again�
Note: The appliance does not work for 10 minutes after a sterilising cycle. It needs to
cool down rst.
- 11 -

Other manuals for Philips Avent SCF293

Related product manuals