EasyManua.ls Logo

Philips Avent SCF293 - Getting to Know the Settings

Philips Avent SCF293
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting to know the settings
Note: Before you sterilise bottles and other items, clean them rst.
Only place items in the steriliser which are suitable for sterilising� Do not sterilise items that
are lled with liquid, e.g. a teether with cooling uid.
Sterilise
Sterilise mode is for sterilising baby items�
A sterilising cycle takes approximately 10 minutes�
Heating up takes approximately 4 minutes and
sterilising takes approximately 6 minutes�
Make sure to pour exactly 130 ml water directly into
the water reservoir of the base �
Auto
Auto mode is for sterilising and drying baby items in
one go�
An auto cycle takes approximately 40 minutes�
When you use the Auto” mode, the appliance starts
sterilising rst and then drying will start automatically.
The sterilising cycle takes approximately 10 minutes,
and the drying cycle takes approximately 30 minutes�
Make sure to pour exactly 130 ml water directly into
the water reservoir of the base �
Dry
Dry mode is for drying baby items�
A drying cycle takes approximately 30 minutes�
When you dry baby items, do not add water to the
water reservoir of the base�
- 9 -

Other manuals for Philips Avent SCF293

Related product manuals