23ENGLISH
Storage
1 Empty the water tank before you store the appliance.
2 Make sure all parts are clean and dry before you store the appliance
(refer to the “Cleaning and descaling” chapter).
3 Store the appliance with the blade unit in the jar to prevent damage.
4 Always make sure that the lids for both the water tank and the jar are
correctly locked in place for storage.
Recycling
This symbol means that this product shall not be disposed of
with normal household waste (2012/19/EU).
Follow your country’s rules for the separate collection of
electrical and electronic products. Correct disposal helps
prevent negative consequences for the environment and
human health.
Guarantee and service
If you need information or if you have any problems, please visit the Philips
website at www. philips. com / avent or contact the Philips Customer Care
Center in your country (refer to the enclosed worldwide guarantee leaet
for details). If there is no Customer Care Center in your country, go to your
local Philips dealer.
Troubleshooting
This chapter summarizes the most common problems you may encounter
with the appliance. If you are unable to solve the problem with the
information below, contact the Consumer Care Center in your country.
Problem Possible cause Solution
The appliance
does not work.
This appliance is
equipped with a
safety lock. This
appliance will not
work if the parts
are not assembled
correctly on the
main unit.
Assemble all parts correctly.
Before steaming, the jar lid
should be placed on the jar and
locked correctly by turning it
counterclockwise. Put the jar back
on the main unit vertically and lock
the jar by turning it clockwise.
To Next Page
Loading...
