Philips AVENT SCF862 - Troubleshooting Appliance Behavior; Appliance Noise, Smell, Heat, or Smoke; White Spots on Water Tank; Food Contact Surface Discoloration

27ENGLISH
Problem Possible cause Solution
The appliance
is noisy,
produces an
unpleasant
smell, is hot to
touch, emits
smoke, etc.
There is too much
food in the jar.
Switch o the appliance and
process a smaller quantity.
The jar lid is not
closed properly.
Place the jar lid on the jar and close
it securely.
You have been
using the blending
function for too
long.
Do not let the appliance blend
continuously for more than
30 seconds at a time.
There are white
spots on the
water tank and
water tank lid.
There is limescale
buildup on these
parts.
This is normal. Remove the
limescale periodically. Clean the
water tank lid and jar lid with a
moist cloth. Descale the water tank.
Refer to the "Descaling" section
in the "Cleaning and descaling"
chapter.
The surfaces of
the appliance
that come
into contact
with food are
discolored.
Food colorings
may discolor the
parts that come
into contact with
food.
This is normal. This does not aect
the quality and the performance of
the appliance. All parts are still safe
to use and will do no harm to the
cooked food.
The blending
jar leaks.
The blade unit is
not assembled
correctly.
Tighten the blade unit.
Incorrect
assembly of the
blade shaft seal
on the blade unit.
Assemble the blade shaft seal
correctly (g. x).
Technical specications
- Voltage/wattage: See type plate on the bottom of the appliance
- Maximum water capacity of the water tank: 180 ml
- Maximum capacity of the blending jar: 400 ml
- Operating temperature: 10°C to 40°C / 50°F to 104°F
- Protection: Temperature-controlled heating system