24 ENGLISH
Problem Possible cause Solution
The steaming
light does
not turn on.
The appliance is
not connected to
the power supply.
Insert the plug in the outlet.
The jar is not
placed on
the main unit
correctly.
Place and lock the jar on the main
unit correctly.
You have started a
second steaming
cycle immediately
after the previous
one has nished.
Switch o the appliance and allow
it to cool down for 10 minutes
before you start a second steaming
cycle.
The water tank
gives o an
unpleasant
smell during
the rst few
uses.
You have not pre-
washed the water
tank before use.
Refer to the "Cleaning and
descaling" chapter to clean the
water tank, then nish a steaming
cycle with an empty jar.
The appliance
does not
generate
steam.
You have not put
water in the water
tank.
Switch o and unplug the
appliance, then add water to the
water tank.
There is too much
limescale buildup
in the water tank.
Descale the water tank. Refer to the
"Descaling" section in the "Cleaning
and descaling" chapter.
The steam path,
water tank steam
outlet and jar lid
steam inlet have
been blocked.
Check the water tank steam outlet,
jar lid steam inlet and the steam
path and ensure there is nothing
blocking them.
Steam is
leaking from
the water tank.
The water tank
lid is not closed
correctly.
Close the water tank lid correctly
by turning it from unlock to lock
position.
The jar is not
assembled
correctly on the
main unit.
Place the jar correctly on the main
unit.
The jar lid steam
inlet is blocked.
Clean the jar lid steam inlet.
To Next Page
Loading...
