PCS 107 140
3-3
INSTRUCTIONS FOR USE
Selecting a different track
During playback you can use the
SEARCH buttons to select a particular
track.
• If you have selected a track number in the
stop or pause position, press
PLAY•PAUSE 2; to start playback.
• Press SEARCH § once briefly for the
next track, or press repeatedly until the
desired track number appears in the display.
• Press SEARCH ∞ once briefly to return
to the beginning of a current track.
• Press SEARCH ∞ more than once briefly
for a previous track.
Finding a passage within a track
1 During playback, press and hold down
SEARCH ∞ or §.
• The CD is played at high speed and low
volume.
2 When you recognize the passage you want
release the SEARCH button.
‹ Normal playback resumes.
Note: During a CD programme or when
SHUFFLE/REPEAT is active, searching is only
possible within a track.
Different play modes
CD MODE/ PROGRAM allows you to
select various play modes.The modes can
be selected or changed during playback of
an entire CD/ CD programme in the
following sequence:
SHUFFLE – all tracks are played in
random order
SHUFFLE REPEAT ALL – repeats the
entire CD in random order
REPEAT – plays the current track
continuously
REPEAT ALL – plays the entire CD
continuously
1 During playback, select your play mode by
pressing CD MODE/ PROGRAM once
or more until the desired play mode is
shown.
• You can use SEARCH ∞ or § to skip
tracks during the SHUFFLE/ REPEAT modes.
• The SHUFFLE/ REPEAT play options can be
combined and used with a programme: e.g.
SHUFFLE/ REPEAT ALL repeats the entire
CD programme in random order.
2 To return to normal playback press CD
MODE/ PROGRAM until the SHUFFLE/
REPEAT modes are no longer shown.
• You can also press STOP 9 to quit the
play mode.
CD-Player
∑
CD Player
Display indication
– Cd OPEN: CD door open
– d1SC: when reading CD contents
– In stop mode: total track number and
total playback time
– During CD playback: elapsed
playback time of current track and
current track number
– Pause: elapsed playback time freezes
and flashes
– SHUFFLE/ REPEAT modes: when the
respective mode is activated
– PROGRAM: when CD programme active;
P
ro
g also appears briefly when you
store a track
– no SEL: programme activated but no
tracks selected
– FULL: programme memory full
–
no
P
ro
g: programme cancelled
– Cd Err, no d1SC or nF d1SC:
error in CD operation /no disc/ or a
CD-R(W) is blank or the disc is not
finalized (see Troubleshooting)
Playing a CD
This CD-player can play all kinds of Audio
Discs such as CD-Recordables and CD-
Rewritables. Do not try to play a CD-ROM,
CDi,VCD, DVD or computer CD.
1 Adjust the POWER slider to CD.
‹ Display: shows Cd briefly.
2 To open the CD door, lift the CD door at
the edge marked LIFT TO OPEN.
3 Insert a CD or CD-R(W) with the printed
side facing up and press the CD door gently
close.
4 Press PLAY•PAUSE 2; on the set to
start playback.
5 To pause playback press PLAY•PAUSE
2;.To resume, press PLAY•PAUSE 2;
again.
‹ The elapsed playback time freezes and
flashes.
6 To stop CD playback, press STOP 9.
7 To switch off the set, adjust the POWER
slider to TAPE/OFF position and check
the cassette keys are released.
Note: CD play will also stop when:
– you open the CD compartment;
– you select RADIO or TAPE sound
source;
– the CD has reached to the end.
CD-Player