Philips AZ1027 - Recording from CD and Radio; Troubleshooting and Product Information; Troubleshooting Common Issues

To stop the play, press • .
Find a passage within a tape
1 During stop, press / to search for a desired passage in a tape.
2 To stop fast search, press
.
Record from CD
1 Switch the source selector to CD .
2 Insert a CD with the printed side facing up.
3 If you want to record tracks in the desired sequence, program the desired tracks .
4 Press
to open the cassette holder.
5 Insert a blank cassette.
6 Close the holder.
7 Press
to start to record.
The disc/program starts automatically from the beginning.
»
To pause, press
•
.
To resume, press
•
again.
To stop, press
• .
Record from radio
1 Switch the source selector to TUNER .
2 Tune to a radio station .
3 Press
to open the cassette holder.
4 Insert a blank cassette.
5 Close the holder.
6 Press
to start to record.
To pause, press
•
.
To resume, press
•
again.
To stop, press
• .
5 Troubleshooting
Warning
Never remove the casing of this Soundmachine. •
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this Soundmachine, check the following points before
requesting service. If the problem remains unsolved, go to the Philips web site (www.Philips.com/
support), or contact Philips (see Contact information). When you contact Philips, ensure that your
Soundmachine is nearby and the model number and serial number are available .